• Accuracy cc. 0.1 mm
• Minimum scan volume: 30 x 30 x 30 mm
• Maximum scan volume: 700 x 700 x 700 mm

Shining 3D EinScan is a series of handheld 3D scanners that can be used to quickly and accurately digitise the shapes and surfaces of objects. These scanners are characterised by their ease of use and high scanning accuracy, making them a suitable choice for a wide range of users, from designers to scientists and engineers.

General safety instructions for 3D scanners:

Read the User Guide:

• Always read and follow the instructions provided by the manufacturer before using the device.

Electrical safety:

• Do not use the scanner in humid areas or near water.
• Always unplug the scanner from the mains before cleaning or carrying out any maintenance.

Eyes and light:

• Never look directly into the light sources of the scanner. If the scanner uses laser technology, be especially careful not to aim the laser beam at your eyes.
• Use in the appropriate environment:Avoid use in dusty, humid or high temperature environments.
• Ensure adequate ventilation if the scanner emits heat.

Mechanical damage:

• Do not place heavy objects on the scanner.
• Handle the scanner carefully to avoid drops or knocks.

Governance:

• Do not attempt to remove or modify parts of the device unless instructed to do so in the instructions. Only use accessories or components recommended by the manufacturer.